Sheraton Single Chair in Mahogany with Straight Legs - A Regency Arm and Single Chair - Regency Mahogany Sabre-Leg Chair

A simpler Sheraton design with tapering legs normally made in mahogany, c. 1800. The arm uprights are of straightforward turning without the spiral reeding which adds greatly to price. An elegant and simple style
which remained popular for many years.
A mahogany armchair of c.1800 date. An excellent example of a good quality chair, as evidenced in the reeding and lightness of design of the back. The turned legs are a little clumsier and have hints of later things to come.
A mahogany Sheraton style single chair, c.1800, with Gothic arching in the design of the back. The legs are tapered on the inside edge only and are reeded, as is the back. An elegant and simple chair.
Country Sheraton design armchair in mahogany with bowed solid seat, c.1810. A satisfying and simple country design of which many were made to meet the popular demand caused by the town versions.
A rather heavier Sheraton style mahogany country chair with drop-in seat, c.1810. The broad top rail of the back has been made slightly wider than the back uprights which detracts slightly from the elegance of the
style. Otherwise the construction and tapering legs are typical.
An elegant chair of the early Regency period, c.1820, with caned back and seat. The outward turn of the simulated bamboo legs is most effective and the balance is completed by the curved top rail. The seat rail and the top rail are inlaid with stringing in the approved classical manner. Many of these chairs were made of birch or beech and then ebonised or painted. They are almost inevitably very expensive.
A country Sheraton single chair in mahogany with straight legs and solid seat, c.1810. The square back with vertical rails owes much to the popularity of Sheraton styles, otherwise the design comes from a
straightforward eighteenth century construction.
Late eighteenth/early nineteenth century oak spindle-back chairs, sometimes called ‘Lancashire’ chairs. They are rush-seated and are sometimes made of elm.
A very simplified country chair of c.1800. The design owes something to Sheraton in the tapering front legs and squared style of the back. The two horizontal rails are very plain and more ornamented versions are to be found. The solid bowed seat is made of elm and the rest of the chair is fruitwood.
Another very elegant Regency chair, c.1825, with rope twist motif on the back and sabre legs. The caned seat again adds to the overall lightness of design.
A similar pair of Regency chairs with reeding continuous down back uprights, sides and sabre legs. The carved decoration is simple and elegant,1830
A Regency period library chair which converts into a set of steps, c.1830. These chairs usually attracted a high degree of craftsmanship and are normally in either mahogany or rosewood. The arms and sabre front legs exhibit typical Regency characteristics although there is a hint of William IV in the broad carved top back rail.
Rather a hybrid piece of furniture which was either little made originally or subject to demolition from heavy bibliophiles. Either way, now becoming rarer and more expensive.
A Regency arm and single chair, c.1825, similar to the previous example in rope twist design but with drop in seats instead of cane. The panel between the horizontal rails in the back is inlaid with brass.
A late Regency or William IV period chair made of mahogany, c.1835. In the heavy curl of the arms and the reeded front legs the approach of the Victorian era is foretold. The bold, wide, outward-pointing top rail is
typical of the 1830 - 40 decade. Look out for conversion front legs, i.e. the original turned and reeded ones are sometimes removed and replaced by sabre legs to increase value.
Balance of top rail  (heavy top rails detract).
A typical Regency mahogany sabre-leg chair of pleasing proportion and design, c.1830. Elegant and small, yet comfortable, this type of chair has become understandably very popular since the war of 1939 - 45. They
are also to be found in rosewood, an even heavier and more durable wood which increases their value.

CHAIRS — balloon back
The nineteenth century saw the development of many new styles of which the dominant one from 1840-1880s was the balloon back with cabriole and turned legs. The evolution is clear but one has only to look at The Pictorial Dictionary of 19th Century Furniture Design to see how style persisted, often over several decades. Confusion on dating is therefore very easy. Prices are for sets of six.  Single examples range from $40 — 70.
The back rail is thin and no longer straight but the decoration on the splat still harks back to William IV (late Regency) as does the drop-in seat and decoration on the legs. c. 1835
Shows a simulated rosewood Regency bedroom chair made of beech in which the splat has developed and an early form of ballooning is evolving. This light and elegant chair contrasts sharply with the late ones.
Set of six each.
A later heavier type with solid turned legs and rather clumsy decoration on the splat. c. 1870
Almost a balloon back but not quite, nevertheless a good design with moulded edges to the legs as well as inside the back.
In walnut with a warm colour not obvious from the photograph. The slight shaping on the top and the small carved supports give the chair an elegant look. c.1850
The later mechanical applied groove decoration and a very simple splat, the legs are pinched (see Agius). The price is relatively high because many people simply do not differentiate between quality. c. 1880
Still a very good chair with an intricate splat which is in its favour, but less style than the previous example. c. 1850
Chairs  show how the balloon shape could infect other chairs of the period, even papier mach& as in 200. Note the difference between the Victorian idea of cabriole and that of the early eighteenth century; the former is bandy legged by comparison. 1860. Set of six.
Moving down the scale, a simple splat and a not entirely successful attempt at decoration just above. The legs lack some of the elegance of the previous examples. c. 1850. If back broken — forget.

Sabre-leg chair

Thomas Hope, connoisseur and dilettante, is credited with the original concept of this radical design, but it was George Smith, cabinet-maker and furniture-maker who simplified the neoclassical shape and made the flush-sided chair a practical
Signs ofauthenticity
1. In solid wood, cut across the grain on the side frames so that at no point is the grain running at an angle of more than 45′.
2. Back rail and crest rail tenoned inside back frame supports.
3. Seat frame flowing in continuous line from crest rail to legs.
4. Upholstered seat contained within seat frame, not
overstuffed.
5. Decoration, stringing, brass inlay, flush with surface and silhouette.
6. On chairs with arms, arm supports in counter-curve to front legs, often with scrolling at armrest.
7. Arms follow precise curve of seat and back frame, finishing flush into front of back support.
8. On chairs with arms, upholstered seat contained within seat frame and arms.
9. Front legs with more pronounced forward curve than back curve of back legs.
10. All legs square-sectioned, unstretchered.
Likely restoration and repair
11. Caned seats replaced with upholstery, covering front seat rail.
12. Legs broken, split and
pinned - most vulnerable point just below knees of front legs. Examine grain closely for
repairs.
13. Back supports broken and repaired. Both these points may not detract from appearance but considerably weaken structure.
14. Decorative brass rosettes on sides of knees, seat frame
junction with back legs - may conceal pinning or repair.
15. Attractive if incongruous carving on front legs other than reeding. Probably conceals a partly replaced leg.
commercial proposition. Its lines derive from Ancient Greek and Egyptian rather than the Adam `classical’ and it represented the height of the Regency taste for unbroken lines and severe curves. Probably the most well-known design – certainly the most copied and reproduced – is the `Trafalgar’ chair, with a rope-twist incorporated into the crest rail or back rail, made to commemorate Nelson’s victory.
There had been many technical advances in furni making by the end of the eighteenth century. Steam-driven machinery, bonding, laminating and veneer-cutting , all had a considerable influ on furniture design. There also a far greater scientific understanding of weight and stress. The flush-sided chair remarkably modern construction, with the timbers cut scientifically across the grain so that the leg and side-frame were made in a single piece, bonded to the curving back and back leg in a single continuous line.
Construction and materials
This radical design was made in solid mahogany, rosewood, simulated rosewood, ebonized beech, real and simulated calamander, and, in some less costly versions, with side frames and seat rails of solid dark woods with a beech underframe. The test of a genuine flush-sided chair is that it can be laid completely flat on its side on the floor. Legs are always unstretchered, the front legs frequently have a more pronounced curve than the back legs - hence its name ’sabre leg’. The crest rail, often several inches deep, is tenoned to the inside of the back supports and does not overrun the seat frame. Chairs with flush sides and crest rails over-running the side are of later date. Seats were upholstered and curved with the side-frame. They were never overstuffed at the front, where there was always a straight seat rail joining the two high-curving knees.
In line with the fashions of the day, the sabre-legged chair was also made in a lighter construction, with a dark wood, or ebonized beech for the frame, and caned seat and back panel.
Detail
Frequently there was continuous reeding which carried from the side of the crest rail, down the top of the seat frame, over the knees and down the front of the slightly tapered square-sectioned legs. Brass inlay, stringing and decoration were flush with the surface. On arms, there is often scrolling at the end of the armrest.
Variations
These chairs required a considerable amount of technical knowledge and equipment to make, and consequently there are no country versions of this design.
The simple shape of the traditional slat back with a deep, plain crest rail and plain wooden or rush seat could probably be related to the sabre-legged chair, but it would be stretching the point. The most commonly reproduced design is the over-curving S-armed chair with matching
dining chairs, often with caned seats, and most frequently found in beechwood, ebonized or painted and gilded. Strictly speaking, these are not true flush-sided chairs, since their arms are round-sectioned and their wide crest rails usually overrun the sides.
Below left: flush-framed, c.1830. Right: cane-seated, flush-framed, c.1820. The rope-twist crest rail has been broken by a stylized decorative design.
Reproductions
Victorian
From the beginning of the Victorian period, the pure shape of the flush-sided chair became spoiled by turned front legs instead of the strict curve of the sabre leg. This was probably because the flush-sided chair was by nature expensive to make and used a considerable amount of timber to achieve the right
spring and strength to the legs.
Twentieth century
Few of the myriad variations begin to match the elegance and simplicity of the original. About 30 years ago the lyre back was very much in fashion, and a variation of the flush-sided chair was made commercially by some high-quality manufacturers, usually in ebonized beech. They proved to be far less durable than the originals, mainly because the difficult cross-cutting of the timber was skimped, and the sabre legs split where the grain ran at too acute an angle.
Modern versions of a cane-seated flush-sided chair are to be found in some high-quality department stores, made with modern techniques, probably in High Wycombe, centre of the chair-making industry in
England, where many of the originals were also made.
Price bands
Late Regency, with overrunning crest rail, £120-150 each. Set of six, £800-1,000.
Cane seat, simulated rosewood, beach frame - set of six, £.880-1,000.
S-arm chair, £250-320.
Plain mahogany - set of six, £700-900.
(Rosewood more expensive than mahogany; brass inlay also more expensive.)
William iv turned leg - set of six, £600-850.