GEORGE III PAINTED ARMCHAIRS - LIBRARY ARMCHAIR - GILTWOOD ARMCHAIR - DINING CHAIRS - HALL CHAIRS - GEORGE II UPHOLSTERED ARMCHAIR

A GEORGE III GILTWOOD ARMCHAIR, the moulded
frame with oval back with padded arms and downswept
supports, the moulded serpentine seatrail centred by an
anthemion clasp, raised on circular tapering fluted legs
with fluted oval feet, circa 1770.

A GEORGE III LIBRARY ARMCHAIR, the rectangular
stufied back with down-curved padded arm supports,
with a loose cushion, on square chamfered moulded legs
joined by H-stretchers, circa 1770.

A GEORGE III GILTWOOD ARMCHAIR in the French manner,
the stuffed cartouche-shaped back within a moulded
frame with out-curved padded arms on scrolling supports, the stuffed seat
with a carved apron on cabriole legs, circa 1775.

A GEORGE III WHITE-PAINTED ARMCHAIR in the French taste,
the padded cartouche-shaped back within a moulded frame
with outcurved padded arms on scrolling moulded supports, the
stuffed serpentine seat on cabriole legs, circa 1770.

A SET OF six GEORGE III MAHOGANY DINING CHAIRS,
including an Armchair, the arched toprails with pierced
splats carved with rosettes and husks around a patera, the
armchair with out-curved moulded arm supports, with
stuffed seats, curved seat fronts, and turned fluted front
legs, circa 1780.

A SET OF TWELVE MAHOGANY DINING CHAIRS, the
rectangular backs with three stick splats, with stuffed
seats and square tapering legs with block feet and
H stretchers.

A GEORGE III WHITE-PAINTED SIDE CHAIR in the
French style, the oval padded back with a moulded
edge, the wedge-shaped stuffed seat on elegant cabriole
legs, circa 1770.

A SET OF THREE REGENCY BRASS-INLAID SIDE CHAIRS
in simulated rosewood, the rope-twist toprail above
two reeded crossbars joined by a panel inlaid with a
rosette and fleur de lys, the stuffed drop-in seats on
sabre legs, circa 1810.

A SET OF FIVE LATE GEORGE III MAHOGANY DINING
CHAIRS including an Armchair, with curved
panelled toprails, three fluted crossbars, the armchair
with downcurved moulded arms on baluster supports,
with stuffed seats and ring-turned baluster legs, circa 1815.

A SET OF six GOOD REGENCY MAHOGANY HALL
CHAIRS, each shaped back with simple incised decoration
and a central roundel painted with an armoriai crest, the
solid seats with canted corners and canted sabre front
legs, circa 1805, with squab cushions.

A GEORGE III MAHOGANY ARMCHAIR, the serpentine
toprail and pierced vase-shaped splat with outcurved
arms, drop-in seat on square legs joined by stretchers,
circa 1765, arms later.

A GEORGE III MAHOGANY ARMCHAIR of bergere
form, the arched stuffed back with a moulded frame and
with stuffed bow-fronted seat and reeded tapering legs,
circa 1780.

A SET OF six GEORGE III MAHOGANY CHAIRS, the
rectangular backs with three fluted splats, the solid seats
with squab cushions, on square tapering legs joined by
stretchers, circa 1800.

A LATE GEORGE II UPHOLSTERED ARMCHAIR, the
high padded back with scrolling arms and the stuffed
seat on square moulded legs joined by turned stretchers,
circa 1750.

A PAIR OF GEORGE II MAHOGANY CHAIRS with
gadrooned serpentine toprails, interlaced pierced splats,
the drop-in seats on carved cabriole legs ending in pad
tetl, circa 1760.)

A PAIR OF GEORGE III MAHOGANY SIDE CHAIRS with
shaped toprails, pierced interlaced splat and the drop-in
seat on square chamfered legs joined by an H-stretcher,
circa 1765.

A PAIR OF GEORGE III MAHOGANY CHAIRS, with arched stufFed
rectangular backs with padded seat on square legs joined by an H-stretcher,
circa 1770.

A SET OF EIGHT GEORGE III PROVINCIAL MAHOGANY
DINING CHAIRS including a pair of Armchairs, with
serpentine toprails pierced vase splats, outcurved arms
and the serpentine-fronted drop-in seats on square
moulded legs, circa 1770, restored     1500-2000
154 A SET OF FOUR GEORGE III MAHOGANY CHAIRS, the
hooped backs with pierced waisted splats headed by
wheat-ears, the stufFed seats on square tapering legs with
H-stretchers, circa 1770.

A SET OF FOUR GEORGE III MAHOGANY DINING
CHAIRS, the shaped moulded backs with pierced,
carved and waisted splats decorated with swags and
paterae, the drop-in seats on square tapering legs,
circa 1780.

A PAIR OF REGENCY CHAIRS with curved panelled
toprails, crossbars, drop-in seats and reeded sabre legs,
circa 1815.

A REGENCY EBONISED ARMCHAIR, the ringed toprail decorated
with flowers above moulded crossbars joined by caning,
with down-curved scrolling arms on scroll supports, with squab

cushion and caned seat, on moulded turned and fluted sabre legs, circa 1810.

A PAIR OF EBONISED AND PARCEL-GILT ARMCHAIRS,
similarly decorated to the previous lot, with square
tapering legs joined by stretchers, circa 1800, originally
unpainted.

A SET OF SIX REGENCY EBONISED DINING CHAIRS,
the turned toprails painted with bunches of flowers
above four crossbars held by gilt balls, with squab
cushions’and caned seats, on ringed splayed tapering
front legs joined by a double stretcher set with a ball,
circa 1810, decoration restored.

A GEORGE II MAHOGANY CORNER ARMCHAIR of
unusual form, with a tall narrow arched upholstered
back, with semi-circular flat crossbars below, the arms
with turned supports and with saddle-shaped seat and
cabriole leg and three further turned legs joined by
turned stretchers, circa 1735.

A GEORGE II WALNUT CORNER ARMCHAIR, with
pierced splats, stuffed drop-in seat and chamfered legs,
joined by stretchers, mid-18th Century    150-250
27 A GEORGE II BOOKCASE with moulded dentil
cornice above a pair of glazed doors with lancet mullions,
containing shelves, the base with two short drawers and
brass handles, 7ft. 5in. high by 5ft. Hin. wide (226cm. by
180.5cm.) circa 1760.

A PAIR OF GEORGE III PAINTED ARMCHAIRS,
the moulded frames with padded shield backs,
padded arms and downswept supports, and the
bow-fronted fluted seatrails on circular

tapering fluted legs, circa 1775, now painted
white and gilt, partly re-railed.

A SET OF SIX LATE GEORGE III CANED MAHOGANY
CHAIRS including a pair of Armchairs, with shallow
curved and caned toprails and matching crossbars, the
seats with rounded corners and circular reeded tapering
legs, the arms with pillar supports, circa 1800, one toprail
and one back broken.

A George III wing armchair upholstered in leather  c.1770. Note the square stretcher and leg construction of ‘Chippendale’ design. The curve of the wings is pleasant but the arms are a little stiff.
Price Range: $200  $300
N.B. As these chairs command high prices there is a grave temptation to make a set of legs in the Georgian style and cover the modern frame with leather. Such examples usually lack the fluency of curve which was
found in better class examples. A good dealer will leave the underneath uncovered to show genuine period features.
A Chinese Chippendale mahogany armchair with upholstered back and arms, c.1760. The bamboo motif is evident. The front legs are a remarkable achievement of craftsmanship and the nicely-scrolled brackets add
considerable balance. The upholstery covering is of typical period design. The legs are of clustered column design.
A later George III period  c.1790  mahogany wing armchair. The sweep of the curve formed by the wings and the back rail is important. Compare the straight high line of the wings and arms in this example with the
fluency of the two previous examples. This example is also rather thin, lacking the generous proportions of the better quality chairs. The lines would be improved by upholstery but the basic quality is lacking. The legs are tapered, ending in casters.
Price Range: $60  $90
Value points: Line of back, arms and wings
Mid-eighteenth century chair in mahogany showing Chippendale construction in legs and stretchers, c.1760.
Carving or moulding on legs  Originality of casters
George II period  c.1740  mahogany chair with stuffed back and saddle-shaped seat. Covered in Soho tapestry woven with birds and small landscapes in broad naturalistic flower borders; on scrolled cabriole legs. Price Range: $150  $200
Regency period chair decorated with brass or painted gilt mounts, frequently ebonised.
Price Range: $20  $40
Value points.- Brass decorations
Well curved leg with stretcher
A later eighteenth century chair, probably c.1795, with leather upholstery, on turned legs. The shaping of the back still follows the ’saddle’ style, but the chair is cruder and the legs date it much later. Price Range: $100
$140
A George III period  c.1780  open armchair with arched stuffed back and padded arms on curved supports with anthemion carving, the moulded frame with bead carving, the stuffed seat on turned tapering  legs with
lotus leaf feet.
An open giltwood armchair  c.1760  with considerable Adam influence in the frieze and fluted legs.
A later eighteenth century open armchair of French influence, but actually of a type made also by Chippendale, c.1780. The decoration includes cartouche backs headed by shell cabochons. The frame is carved with leaf mouldings, the scrolled arms with leaf shoulders. Covered in later gros-point needlework with panels of flowers in key-pattern frame against a blue ground with roses.
Bergere caned chair of Regency period, in rosewood, c.1830. These well made chairs have increased in popularity over recent years.

A SET OF SEVEN GEORGE III MAHOGANY DINING CHAIRS
Each with a shield-shaped back and pierced vase splat, with a padded seat, on square tapered legs with spade feet, and a matching single chair of a later date.
A GEORGE II STYLE MAHOGANY OPEN ARMCHAIR
With a floral-carved top-rail and pierced interlaced vase splat, foliate-carved arms, tapestry drop-in seat and scroll-carved cabriole legs with claw and ball feet.
A SET OF EIGHT MAHOGANY DINING CHAIRS, early 20th
century
Including a pair of elbow chairs, each with an undulating foliate-decorated top-rail and pierced chamfered Gothic arched sprats, with a drop-in seat, on moulded square tapered legs.
A GEORGE III STYLE MAHOGANY OPEN ARMCHAIR
With a serpentine top-rail and pierced foliate-carved vase splat, outswept arms with foliate scroll terminals, drop-in tapestry seat and scroll-carved cabriole legs with claw and ball feet.
A SET OF SIX REGENCY SIMULATED ROSEWOOD DINING CHAIRS
Each with a maple lotus-carved curved bar top-rail and horizontal splat, with a drop-in seat, on bead-decorated.
A SET OF TWELVE MAHOGANY DINING CHAIRS
With ebonised incised lines, each with a key-pattern curved bar top-rail and horizontal splat, with a padded seat on sabre legs.
A SET OF SIX REGENCY MAHOGANY DINING CHAIRS
Including one elbow chair, each with a brass-inlaid curved bar top-rail and rope-twist horizontal splat, with a drop-in seat, on moulded sabre legs .
A SET OF SIX GEORGE III MAHOGANY DINING CHAIRS
Each with a moulded shaped arched top-rail centred by a foliate spray and a pierced reeded baluster splat, with a drop-in seat, on square tapered legs joined by stretchers
Each with an undulating top-rail and foliate-decorated Gothic arched splats, with a padded bowed seat, on tapering legs .
A MAHOGANY CHAIR-BACK SETTEE
The undulating back with shield-shaped panels with pierced vase splats, with a padded bowed seat, on square tapered legs with spade feet.
A SET OF TEN WALNUT DINING CHAIRS
Including a pair of. elbow chairs, each with a moulded curved bar top-rail and solid vase splat, with a slip-in seat, on cabriole legs terminating in pad feet.
A SET OF TEN MATCHING WALNUT DINING CHAIR
A WALNUT THREE-PIECE SUITE
In the William and Mary style, comprising a pair of armchairs and a three-seater settee, each with a caned panel back with a pierced arched foliate scroll cresting, with outswept scroll arms and padded seat, on ring-turned legs terminating in Braganza feet.
A PAIR OF GIFTWOOD WINDOW SEATS, early 19th century
Each with padded sides with reeded arm and tapered columns, with a padded seat, on turned tapered legs 42in.
A SIMULATED ROSEWOOD AND PARCEL-GILT ELBOW CHAIR,
early 19th century The U-shaped caned panel back and arms terminating in lions mask terminals, with bowed caned seat on ring-turned tapered legs terminating in paw feet, the decoration of a later date.
A SET OF EIGHT GEORGE IV MAHOGANY DINING CHAIRS
Each with a scroll curved arched bar topsail and reeded horizontal splats with cruciform panels, with a padded seat on moulded square tapered legs with turned feet, some stamped Wilkinson. Ludgate Hill, numbered variously 89.39, 8940, and initialled variously, T. N., H. Al., 1.G., 1. Al. (8) William Wilkinson used this stamp up to about 1820 and with his sons traded from this address until about 1840. Dictionary of English Furniture Makers 1660-1840, Maney, 1968.
A GEORGE III MAHOGANY ELBOW CHAIR
The back with an undulating top-rail and pierced vase splat, with a padded seat, on square chamfered tapered legs; and an accompanying Victorian rosewood footstool, on bun feet.

The variety of chairs burgeoned in the mid to late 18th century, with French styles remaining popular. Although elements of the Rococo style lingered, chairs began to look more Neoclassical and became squarer and straighter. cabriole legs were rejected in favour of turned, tapered supports, often fluted or decorated with reeding, and oval and rectangular-    backs became more common.
Different types of chair evolved: the bergere remained the same stylistically, but the frame was often simply waxed, rather than painted and gilded, as in the first half of the century. Desk
chairs and corner chairs, which were popular at the beginning of the period, had shaped backs. The shield back became fashionable towards the end of the century, with the pierced splats incorporating a wide range of Neoclassical motifs. Desk chairs usually had rounded seat rails and often had an extra leg at the centre of the seat rail, making five legs in total.
Corner chairs, like hall chairs, were small and designed to be decorative rather than useful. They were usually rather fragile, as they were not designed for regular use.
At first, chairs were ordered individually, but from the mid century onwards, sets of furniture known as suites became more popular. These varied from small groups of matching chairs to extensive suites that included a number of pieces, such as armchairs, side chairs, bergeres, window seats, stools, and sofas.
Any decoration on hall and corner chairs was likely to be carved, but more expensive armchairs and their matching side chairs, designed for grander rooms, were often delicately painted or highlighted with gilding.
The top rail is waxed, rather than painted.
The sides of the chair are fully upholstered.
LOUIS XV BERGERE
This chair shows how Rococo style adapted to Neoclassical fashion. The beech frame retains a carved, serpentine top rail and cabriole legs, but is waxed. The chair is upholstered in blue silk.
The armrest is upholstered where the sitter’s arm is placed.
A simple C-scroll connects the arm to the cabriole leg.
The rear leg extends outwards.
LOUIS XVI DESK CHAIR
This French tub desk chair has a curved and lightly carved seat rail, and the seat, back, and sides are all upholstered in leather. It has Neoclassical turned and tapered armrests and legs. c.1780.
QUEEN ANNE CORNER CHAIR
This walnut chair has a crest rail with a raised yoke centre, shaped arms, and solid, vase-shaped splats. It has one front cabriole leg and three turned legs, all with slipper feet. c.1770-1800.
SOUTH AFRICAN CORNER CHAIR
This chair is made from native stinkwood and yellow wood. The pierced back splats are reminiscent of Chippendale designs. The square, chamfered legs are connected by stretchers. c.1780
NEW YORK CORNER CHAIR
This mahogany chair has a top rail with a raised yoke centre, carved knuckle handholds, and vase-shaped splats. The deep seat rail is supported on three cabriole legs with slipper feet and one rear turned leg. c.1750.
GEORGE III HALL CHAIR
This mahogany hall chair has a cartoucheshaped back. Within the C- and S-scrolled frame are carved heraldic elements, including an Irish harp and crown. The piece terminates in panelled, tapering legs. c.1770.
GEORGE III HALL CHAIR
One of a set of four, this mahogany chair has a typically Neoclassical oval back. The solid mahogany seat overhangs the front rail. Tapering legs support the frame and a stretcher connects the rear legs. c.1780.
CHINESE CORNER CHAIR
This rosewood chair has a central leg with a shell carved on the knee, and it terminates in a claw-and-ball foot. Attenuated turned stretchers anchor the legs. c.1780.
GEORGE III CORNER CHAIR
This provincial oak chair is one of a pair. The seat is composed of three planks of oak. Turned spindles connect the seat to the rounded back, a technique often seen on Windsor chairs c.1800.
ENGLISH HALL CHAIR
This mahogany chair has a balloon-shaped back that fits into a shoe at the base. The seat is solid mahogany with a circular lowered section. The tapered legs terminate in squared ends. c.1790
CHINESE HALL CHAIR
This chair was made for export to the West. The solid splats are decorated with an inlay. The dish-moulded seat is shaped at the edges. Square, chamfered legs are joined by stretchers. c.1760.
ENGLISH HALL CHAIRS
These mahogany hall chairs have central veneered tablets, and pierced, waisted supports. The seats are slightly bowed and framed with panels. The turned, blocked legs are joined by cross-stretchers.
c 1780.

THE CHAIRS that Chippendale created and reproduced in his book The Gentleman and Cabinet-Maker’s Director (1762) offer a sample of the various design trends in the mid to late 18th century, such as Rococo, Chinese, Gothic, and Neoclassical. Chippendale’s name has become generic for 18th-century furniture and, in particular, chairs, but his designs borrowed from published English and French work. His most original work can be found in his Neoclassical pieces, which he created from 1760 onwards, inspired by the interiors of architect Robert Adam. Despite the variety of influences on his designs, many Chippendale chairs follow a basic pattern, with their stylistic influence being most obvious in their carving. Therefore, while most chair backs had pierced and interlaced splats with carved scrollwork, it is the shape and carving that reveals the
predominant influence: cartouche shapes and scrolling acanthus for Rococo, Gothic arches, Chinoiserie fretwork, and interlacing ribbons, or the lyre and fan shapes typical of Neoclassicism. The importance of deep-cut, detailed carving in Chippendale’s designs meant that mahogany was most commonly used, although provincial versions were still often made in walnut or fruitwoods.
The top rails of the chairs were usually serpentine in shape, sometimes ending in carved ears, with stiles curving outwards. Most of them had squared or trapezoidal seats, and while Chippendale preferred stuff-over upholstery, many cheaper or colonial versions had slip-in seats. Designs often had different front and back legs. The front legs could be cabriole with a claw-and-ball foot, tapered, or straight with stretchers. Mahogany is well suited for the elaborate carving of the back splat.
The drop-in seat is upholstered in pale yellow floral silk damask.
Rear legs were often simply chamfered, as these chairs were placed against the wall.
The cabriole front legs terminate in elegant carved scroll feet.

DINING CHAIR
This mahogany chair, part of a set of 11 together with one later copy, has a serpentine top rail above an interlaced, pierced splat headed by C-scrolls carved with leaves. The cabriole legs are flanked by C-scrolls, also carved with leaves, and the legs taper towards scrolled toes. c.1775.
NEW HAMPSHIRE DINING CHAIRS
Each of these mahogany dining chairs has a serpentine top rail with rounded shoulders and flaring stiles with scribed borders. The interlaced back splat includes an inverted heart cut-out shape. The over-upholstered, seat is a trapezoidal shape and has a serpentine front. The piece is supported on square-moulded, chamfered legs. The legs of the chair are joined by recessed box stretchers. The chairs retain an old or original finish, and are attributed to Robert Harold of Portsmouth. c.1765-75.
ENGLISH DINING CHAIRS
The serpentine top rail of each mahogany chair is carved at the shoulders with scrolls and foliage. The pierced, vase-shaped back splats are carved with acanthus and trailing foliage. The curved arms with scrolling ends have downward-sweeping supports, and stretchers join the straight front legs and sweeping back legs. The saddle-shaped seats are covered in red leather with a double row of studs. c.1770.
ENGLISH DINING CHAIRS
These mahogany chairs have serpentine top rails carved with trailing acanthus and side rails with flowers and trelliswork. The pierced, vase-shaped back splats are carved with acanthus and rocaille. The curved arms have downward-sweeping supports. The chairs have drop-in seats with egg-and-dart-moulding on the seat rails. The square front legs have chamfered back corners and foliate brackets, while the back legs are sweeping.
AMERICAN CARVED SIDE CHAIR
This walnut chair has a serpentine top rail centred by a carved shell over a pierced, vase-form splat. It has a moulded seat rail, padded drop-in seat, cabriole legs, and claw-and-ball feet. Late 18th century.
ENGLISH DINING CHAIR
This mahogany chair has an arched, moulded top rail and carved shells at the corners of the uprights, in the centre of the pierced splat, and at the centre of the shaped apron. c.1770.
AMERICAN ARMCHAIR
This mixed wood armchair from Philadelphia has a serpentine top rail, an urn-shaped splat, and flared arms with scrolled knuckles. It has a straight seat rail, a slip seat, cabriole legs, and pad feet. Mid to late 18th century.
GEORGE III ARMCHAIR
This child’s open mahogany armchair has a serpentine top rail and a ladder-back splat. The scroll arms have fluted uprights. The stuff-over seat rests on square, tapering legs. c.1790.
GEORGE III SETTEE
This early George III mahogany chair-back settee has a C- and S-scroll top rail above two pierced, vase-shaped splats with an open outscrolled arm at each end. The stuff-over seat rests on chamfered, square- section legs joined by stretchers.
COLONIAL INDIAN SIDE CHAIR
This Asian hardwood chair has a serpentine top rail above a pierced, vase-form back splat. The shaped seat rail has a padded drop-in seat. The cabriole legs have acanthus-carved knees. c.1770.
AMERICAN DINING CHAIR
This is one of a pair of fine Delaware Valley walnut chairs. Each has a serpentine top rail centred by a carved shell over a pierced, vase-form splat. The moulded seat rail has a drop-in seat. c.1770.
CHIPPENDALE’S CHAIR DESIGNS
In the notes that accompany his illustrative plates, Chippendale wrote that there “are various designs of chairs for patterns. The front feet are mostly different, for the greater choice.” Elsewhere, he was more specific, as with his instructions that chairs should be upholstered in the same material as the window-curtains and the height of the back should seldom exceed 55cm (22m) above the seat — although sometimes these dimensions could be less to suit the chairs to the room.
Chippendale felt that “seats look best when stuffed over the rails and have a
brass border neatly chased; but are most commonly done with Brass Nails, in one or two Rows.” Despite the number of designs in his Director, not all the chair patterns that are termed “Chippendale” are included: the ladder-back design, for example, does not appear.
Chippendale’s designs for chairs and backs of chairs were perhaps the most influential of his designs to appear in the Director. His designs were interpreted by craftsmen throughout the world, who
followed his instructions to varying degrees, and so increased the variety of “Chippendale” chairs.