Sheraton Single Chair in Mahogany with Straight Legs - A Regency Arm and Single Chair - Regency Mahogany Sabre-Leg Chair

A simpler Sheraton design with tapering legs normally made in mahogany, c. 1800. The arm uprights are of straightforward turning without the spiral reeding which adds greatly to price. An elegant and simple style
which remained popular for many years.
A mahogany armchair of c.1800 date. An excellent example of a good quality chair, as evidenced in the reeding and lightness of design of the back. The turned legs are a little clumsier and have hints of later things to come.
A mahogany Sheraton style single chair, c.1800, with Gothic arching in the design of the back. The legs are tapered on the inside edge only and are reeded, as is the back. An elegant and simple chair.
Country Sheraton design armchair in mahogany with bowed solid seat, c.1810. A satisfying and simple country design of which many were made to meet the popular demand caused by the town versions.
A rather heavier Sheraton style mahogany country chair with drop-in seat, c.1810. The broad top rail of the back has been made slightly wider than the back uprights which detracts slightly from the elegance of the
style. Otherwise the construction and tapering legs are typical.
An elegant chair of the early Regency period, c.1820, with caned back and seat. The outward turn of the simulated bamboo legs is most effective and the balance is completed by the curved top rail. The seat rail and the top rail are inlaid with stringing in the approved classical manner. Many of these chairs were made of birch or beech and then ebonised or painted. They are almost inevitably very expensive.
A country Sheraton single chair in mahogany with straight legs and solid seat, c.1810. The square back with vertical rails owes much to the popularity of Sheraton styles, otherwise the design comes from a
straightforward eighteenth century construction.
Late eighteenth/early nineteenth century oak spindle-back chairs, sometimes called ‘Lancashire’ chairs. They are rush-seated and are sometimes made of elm.
A very simplified country chair of c.1800. The design owes something to Sheraton in the tapering front legs and squared style of the back. The two horizontal rails are very plain and more ornamented versions are to be found. The solid bowed seat is made of elm and the rest of the chair is fruitwood.
Another very elegant Regency chair, c.1825, with rope twist motif on the back and sabre legs. The caned seat again adds to the overall lightness of design.
A similar pair of Regency chairs with reeding continuous down back uprights, sides and sabre legs. The carved decoration is simple and elegant,1830
A Regency period library chair which converts into a set of steps, c.1830. These chairs usually attracted a high degree of craftsmanship and are normally in either mahogany or rosewood. The arms and sabre front legs exhibit typical Regency characteristics although there is a hint of William IV in the broad carved top back rail.
Rather a hybrid piece of furniture which was either little made originally or subject to demolition from heavy bibliophiles. Either way, now becoming rarer and more expensive.
A Regency arm and single chair, c.1825, similar to the previous example in rope twist design but with drop in seats instead of cane. The panel between the horizontal rails in the back is inlaid with brass.
A late Regency or William IV period chair made of mahogany, c.1835. In the heavy curl of the arms and the reeded front legs the approach of the Victorian era is foretold. The bold, wide, outward-pointing top rail is
typical of the 1830 - 40 decade. Look out for conversion front legs, i.e. the original turned and reeded ones are sometimes removed and replaced by sabre legs to increase value.
Balance of top rail  (heavy top rails detract).
A typical Regency mahogany sabre-leg chair of pleasing proportion and design, c.1830. Elegant and small, yet comfortable, this type of chair has become understandably very popular since the war of 1939 - 45. They
are also to be found in rosewood, an even heavier and more durable wood which increases their value.

Bentwood chairs have become so much a part of our lives as to be almost invisible. In a simplified form they have been used in so many everyday places - shops, schools, private houses and public places - that it is difficult to imagine that their whole style was once a complete revolution in furniture-making. Today they are turned out in their thousands in factories all over
Signs of authenticity
1. Laminated wood, built up of alternately grained strips.
2. Generous curves with long unbroken sections curving under and over, rather than separate pieces joined at short intervals.
3. Taut panels caned on the diagonal to allow for the springiness of the chair.
4. Surface of wood smooth and silky, instantly recognizable once touched, compared with later solid bentwood.
5. Impeccable finish with sections shaped and smoothed to flow into the join.
6. Early solid birch bentwood chairs should be finely sanded and finished under black
I ebonized’ paint.
Likely restoration and repair
7. Laminated bentwood chairs and rockers which have been subject to too many changes in temperature and humidity will be ’sprung’ on curves, i.e. there will be splitting where the wood has shrunk and pulled away. It may be tacked and glued back into position but the damage is permanent and will occur again.
8. Recaned on the horizontal and vertical. The caning will break and the chair will not maintain its shape, but will eventually split from the strain.
9. Black paint stripped off. If this has been done by complete immersion in a caustic solution there may be some dissolving of the adhesives between laminations. Stripping must be done painstakingly by hand and there should be some small signs of remaining paint.
England, but their origins were elite and aesthetic.
Michael Thonet (1796-1871),
their inventor, was an Austrian who trained as a craftsman in the South German Biedermeier school of furniture-making. This was established as a reaction against French influence, in part motivated by the aspiration for a united Germany after the Napoleonic Wars, and in part aesthetic, a search for well-designed ‘bourgeois’ furniture. The parallel desire was felt in England, and was evident in the designs of J. C. Loudon and his school. Biedermeier was particularly successful with seat furniture, which was solid, well-made, elegant and, above all, comfortable. It was Michael Thonet’s search for new materials and techniques to
make chairs without ornament, carving or traditional construction that led him to experiment with the shipbuilding techniques of steaming and bending wood. His designs were first produced in laminated wood in the 1840s.
Thonet took out patents for his chair-making techniques, but when the patent ran out in the 1860s a London firm of furniture-makers, Hewlett and Company, took it up, and by the end of the century bentwood chairs were being made by many furniture-makers, particularly in High Wycombe, centre of England’s chair-making industry.
Construction and materials
Michael Thonet’s original designs were made in thin strips of wood, steamed and bent into shape and laminated together - a technique which had been known in England for about 100 years, although laminated wood had only been used for parts of furniture and not for a whole piece. Thonet’s first commission for these novel, smooth-curving designs was for the Leichtenstein Palace in Vienna, and although they were more detailed and complicated in their sinuous construction, the basic bentwood chair of today differs very little from those prototypes.
In England, the technique of steaming and bending wood had been applied to Windsor chairs for some years, using solid wood as
Variations
Bentwood chairs were particularly suitable for children, and both high chairs and small, miniature versions of the standard shape were made, particularly in the 1920s, for use in schools and nurseries.
Some early, finely designed, bentwood chairs made in England include versions of the sabre-legged S-armed chair, with the back made in a single hoop with the back legs, which are raked well back. Front legs curved forward in imitation of the line of the sabre-leg, but were round-sectioned and taper-turned. The S-curve of the arms was particularly suitable for the new bentwood technique.
Once furniture-making factories had begun to turn out bentwood chairs by the thousand, their finish and style degenerated into the ‘tearoom chairs’ of the 1920s and 1930s, being reduced to circular hoops and slightly splayed legs, whose timber was no longer carefully chosen for the correct grain, and which have since split and cracked.
opposed to laminated. The timber was generally birch, traditional wood for chair-legs because it was amenable to bending and was springy enough not to break or split. The cane seat, too, had been in production for country chairs and lightweight seat furniture ever since Sheraton had reintroduced it at the end of the eighteenth
century.
Early genuine Thonet bentwood chairs and rockers, for which the technique was particularly
suitable, were more curvaceous and elaborate, mainly due to the laminated wood which allowed more freedom than later bentwood chairs in birch, which consisted mainly of a series of hoops and standardized curves.
Reproductions
After a considerable spell of unpopularity as ‘cheap chairs there are now many extremely good reproductions of the original bentwood chair on the market, many of them originating in Taiwan and the Far East, where manufacturing is cheap and labour still skilled in traditional crafts such as caning. Their reappearance on the English scene can largely be attributed to the many well-designed small restaurants with imaginative decor, for which they were originally imported.
Price bands
Superb intricate shapes, top condition with original labels and original, unshipped
finish, £850-1,000.
Stripped or plain, simpler shapes with original label, £550-850.
Set of six chairs, original caning and labels, £350-500.
Period singles with labels and authentication, 135–50.
1920s plain but in good condition, £15-20.
Above: a child’s bentwood high chair, c.1870.
Right: an original Thonet, c.1860.

Even at its most decorative and ornate, Sheraton furniture is made with very little integral ornament, and relies for its originality and sparkle on painting and gilding, inlay and japanning. Sheraton was puritan by conviction and by nature, favouring straight lines rather than curves, and multipurpose space-saving furniture for the ranks of Georgian terraced houses which had recently been built. He came to London in 1790 from the North of England, and was designing during the Napoleonic Wars, when materials and money were short, and much of his furniture was made in cheaper beechwood and birch, rather than expensive mahogany, although he did favour satinwood which was costly. In construction, Sheraton was a
traditionalist. He reverted to the old manner of making chairs with crest rails tenoned between the back supports, as opposed to overriding them or curving into them. On chairs with arms, he took the line even higher than Hepplewhite, so that the arm of the chair sweeps up to the crest rail in an abrupt curve, almost as though it is part of the back itself.
Signs of authenticity
1. Made of beech, with ash or birch underframes.
2. Crest rail tenoned into sides of back supports.
3. On chairs with arms, arms joined oined to fronts of back supports, high up and usually on a line with a horizontal back rail.
4. On chairs with upholstered seats, pronounced height of seat above frame.
5. Front legs taper-turned to the frame, then square-sectioned, forming the corners of seat
frames on straight-fronted chairs.
6. On chairs with round seats, legs taper-turned to frame, then square-sectioned flush with curve to form solid underframe.
7. Back legs either square-sectioned or taper-turned, but always square-sectioned at seat level to form stout join of chair frame.
8. Crest rail, supports and arms all turned, reeded or fluted.
Likely restoration and repair
9. Original frames of seats overstuffed when re-upholstered – a frequent Victorian practice.
10. Stripped and repainted and gilded.
11. Recaned panels and seats.
12. New blocks on corners of drop-in seat frame.
13. Damaged cane seats overstuffed – signs of holes for original caning on underframe.
14. Made of cheaper birch entirely – probably a later copy.
Construction and materials
In spite of their air of fragility, Sheraton chairs were remarkably solidly constructed, often in beech, with a sound knowledge of timber and of stresses and strains. In their basic construction, they have more in common with the traditional framed construction than any chairs made from the beginning of the eighteenth century onwards. The back is supported by a top rail and lower rail set parallel and tenoned into the sides of the back supports. The back legs are raked back and square-sectioned in his early designs, though later they were less solid and usually tapered or taper-turned, like the front legs. On chairs with arms, the design exaggerates the line of continuity from front leg to arm support, carrying it up to elbow height, often without a curve at all. The back splats are arranged in geometrical patterns of parallel
lines, lattice, or a mixture of both. Seats were often curved or round, upholstered and built up on a solid front apron.
Drop-in seats were
supported with four shaped brackets on the four corners of the seat frame. Front legs were taper-turned, and the use of beech allowed a slight splay since it is a pliable, springy wood, not rigid or liable to split.
Detail
Sheraton seats were often caned, sometimes also with caned panels in the rectangular backs. The back splats were characteristically arranged in geometrical patterns of parallel lines, lattice, or a mixture of both. Japanning, painting and gilding were also used. Crest rails, supports and arms were often turned, reeded or fluted to lighten the design.
Variations
The return to the square back suited many country chair-makers who were still making chairs with traditional construction, to which Sheraton had returned. Most typical of the country versions of his designs are the plain bar-back and rail-back chairs. The other two types of country chairs of the period could equally well have evolved naturally, without benefit of Thomas Sheraton’s The Cabinet Maker and Upholsterer’s Drawing Book (1791-94), and indeed could have been the inspiration for many of his rectangular chair designs. Both originated in the North of England – the spindle back and the bobbin back with their deep plain crest rails developed from the old box-construction.
The country tradition of setting the front and back stretcher slightly higher than the side stretchers continued, and the front stretcher was also often simply turned, again a country tradition. On country chairs of this period, wooden seats were often slightly dished. On chairs with arms, the construction was traditional, with the arm support being a continuation of the front leg, with the arm tenoned into it.
Top: late eighteenth-century, cane-seated chair in simulated bamboo.
Above: Sheraton provincial chair, c.1810.
Reproductions
Nineteenth century
Sheraton was very much a designer for the trade, and contemporary production of his chairs and other furniture was extremely large. During the early nineteenth century
Gillows of Lancaster, the
Seddons, Edwards and Roberts, Cooper and Holt, Wright and Mansfield, Jackson and Graham, Johnson and Jeans and many other large furniture manufacturers made quantities of Sheraton furniture.
The Victorians copied some of his more fantastic ‘Egyptian’ and classical designs, suitable for the increasing
ostentation in taste, and many Sheraton-style chairs were made in mahogany to give them a more substantial appearance.
Some of these nineteenth-century variations are pleasing, solid and well-constructed. Later versions are not so successful, having square-sectioned tapered legs and stretchers, or more bulbously turned front legs. The height of the bottom back rail was an integral part of the construction as well as the design, and on late versions chairs look oddly proportioned, as though the chair back has been compressed.
Twentieth century
During the Edwardian period, countless cheap copies of Sheraton’s little cane-seated chairs, gold-painted and flimsy, were made for ballrooms and public functions. They should not be confused with Regency ,rout’ chairs, which were elegantly proportioned and well-made, though few of them have survived intact.
Price bands
Simulated bamboo, c.1810, £.115-125.
Square back, reeded, c.1810, £120-180 each.
Set of six, with two
armchairs, £3,200-4,000.
Provincial reeded and plain, £90-120 each.
Set of six, £1,500-1,800.