George II period mahogany chair - Antique Chair in Oak - Chippendale mahogany chair in the Gothic style - A Chippendale mahogany ladder-back chair
George II period mahogany chair - Antique Chair in Oak - Chippendale mahogany chair in the Gothic style - A Chippendale mahogany ladder-back chair
A George II period mahogany chair, c.1735. quality Cuban mahogany has been used, the normally be associated with walnut; but there se Shaped splat has small scrolls and a shell
are topped with eagle heads patterns carved on the knees.
Note that although a fine style is one which would are extra refinements. The work top. The shaped up-and the cabriole legs have
Price Range: Single chair $90 $110
In sets $175 $230 per chair
Another walnut pre-Chippendale chair with simpler but similar back splat _esign. The square legs and stretchers suggest a later date possibly -50 and the proportions are a little less ample, but this is nevertheless a very pleasing chair. There is a drop-in seat and the front legs have a scratch moulding down the front corners; they are chamfered at the back. Price Range: Single $15 $25
Quality and execution of back splats
Antique Chair in Oak - A Charles II c.1675 oak chair - Late Seventeenth Century Country Walnut ChairChippendale mahogany armchair of considerable quality, c.1760. cabriole legs, decorated with shell and scroll pattern carving on the knee, terminating in excellent ball-arid-claw feet. The arms sweep boldly outwards, terminating almost at right angles to the line of the sides in scrolls. A very well proportioned back splat, with the upper scrolled curves leading perfectly from the top rail, which is also carved with leaf patterns. Note the boldness and width of the fully upholstered seat which is covered in leather. N.B. Although this type is generally known as a ‘Chippendale’ chair, it is interesting to recall that the Director’ shows chairs with cabriole legs with scrolled feet, until the third edition, when a plate of hall chairs shows the ball and claw foot, which was undoubtedly popular at this period.
Price Range: $300 $400
Value points: Quality and execution of cabrioles
Quality of back splat and carving
Warning: Many high quality Victorian reproductions exist of this type of chair. These reproductions have a value of $25 $35 each.
Antique Chair in Oak - A Charles II c.1675 oak chair - Late Seventeenth Century Country Walnut ChairA single mahogany Chippendale chair, c.1760, of similar type to the preceding armchair but of bolder proportion. While the back uprights are reeded however, the legs are not. A scratch moulding down the corners of the front legs gives added lightness and the front apron is slightly serpentine. Note the very fine quality of the scroll and leaf carving which is pleasantly mellowed with age and lacks the sharpness of a reproduction piece. The overall proportions of the chair are extremely pleasing and demonstrate the ample size of eighteenth century seats.
A mahogany Chippendale chair, c.1760, with the splat again showing the Gothic influence in the arching. The top rail is waved and carved with leaves, but the legs and stretchers are the plain robust design of the
period.
Country Chippendale armchair in elm c.1770. A simple and appeallingly bold chair although this example has been worn or slightly cut down in the leg. The seat is fully upholstered, which may be a conversion due to damage to the front rail. The tenon joints are pegged.
Price Range: $30 $40
Colour, figure and patination
Quality of splat
Chippendale mahogany chair in the Gothic style, c.1755. Although the Gothic influence and French influence also are evident, it is only in mild form in this chair. In earlier versions taken from Chippendale’s `Director’ the Gothic designs are very much more exaggerated, with multi-arched backs and heavily fretted legs and stretchers. This chair is of high quality, good proportion and restrained, though righ, execution. (Gothic and Chinese Chippendale chairs of high quality are much sought-after).
A Chippendale ‘Ribbon’ back chair of c.1760 - 70. So called because of the ribbon carving in the back. Due to the craftsmanship involved in executing these chairs they naturally command high prices and are relatively scarce. The remainder of the chair is of typical Chippendale design, with fully upholstered seat which in some cases may be serpentine at the front.
It is interesting to note that although the period after 1730 - 40 is generally associated with mahogany, a well known example of this type exists in walnut, and walnut chairs are to be found of even later date.
Another Country Chippendale armchair c.1770 of more ornate splat design, with drop-in seat. The Gothic influence is evident in the arching within the splat and the top rail is also arched in a slightly later style. Usually to be found in mahogany or country wood such as elm or birch stained mahogany colour.
Warning: Many such chairs, having been used hard for many years, have had stretchers replaced or cut legs replaced. Watch also for broken or replaced splats and top rails; the latter particularly at the tenon joint with
the upright.
A Chippendale mahogany ladder-back chair of c.1765. The ladder-back designs tended to be of later Chippendale period. In this case the back rails are elegantly designed and pieced to add lightness to the overall effect. Note the scratch moulding down the front leg corners also to add lightness and the chamfered backs of the front legs.
Tags: Antique, ARMCHAIR, cabriole, cabriole legs, century, ChairChippendale, chippendale chair, cuban mahogany, leaf patterns, mahogany, mahogany chair, right angles, scrolled feet, Seventeenth, side, Upholstered