Chippendale dining chair

Historical background
Designs for Thomas Chippendale’s chairs were freely available once his pattern book, The Gentleman and Cabinet Maker’s Director was published in 1754 and were
Signs of authenticity
1. Solid, heavy mahogany, smooth and silky to the touch.
2. Underframes of beech, plane or sycamore.
3. Crest rails fitting into tops of side rails where design scrolls outward-curving.
4. Crest rails fitting between curving side rails where design is rounded.
5. Drop-in or overstuffed seats.
6. Separate shoe-piece attached to back of seat frame.
7. On chairs with cabriole legs, deep apron with rounded corners to seat frame.
8. On chairs with square legs, square corners to seat frame.
9. Seat frames on early dining chairs straight (not dished until c.1780).
10. On chairs with arms, arm supports set back almost half the depth of the seat, screwed with hand-cut screws, the screwholes concealed by plugs or dowels, now virtually invisible.
Likely restoration and repair
11. Later carving and fluting to legs – carving will not stand proud of silhouette.
12. Broken back legs repaired or replaced, by dowelling into sawn ends on the line of the apron.
13. Drop-in seats replaced with overstuffed – the apron beneath the seat material will be
polished like the rest of the frame, not left plain or made of correct underframe wood.
14. Heavy carved decoration on back side rails – either carved later, or a marriage between a late Victorian copy and a period chair. Correct decoration for period was plain or fluted.
15. Later, Victorian cabriole legs dowelled into underframe to replace broken originals. Bandy-legged appearance where not enough thickness of wood has been used for the legs.
made with modifications and variations by numerous furniture-makers throughout the period 1754-80.
The main shift in design from previous shapes was the squared, almost over-running shape of shoulder and crest rail, and the pierced and carved central splat. Mahogany was used almost exclusively for dining chairs of this period: its immense strength and density allowed pierced work of great elaboration. The beginning of the period maintained rounded
corners to chair seats, but once Chippendale reintroduced plain squared legs, seat corners were also square.
Chippendale chairs were made in sets for dining rooms. Their backs were lower to allow the newly adopted custom of dining d la Berline – with footmen serving dishes individually, instead of the hitherto traditional English way of dining, from a side table heaped with food.
Construction and materials
Throughout the Chippendale period, dining chairs were made in solid mahogany, oiled and rubbed smooth with brick dust or sand to a glossy, silky finish. The backs of chairs were lower, with square shoulders often terminating in small upward-curling scrolls. There were two types of construction: the traditional, with the crest rail fitting between the two side rails which curved inward towards the centre, and the innovative, with the crest rail almost over-running the outward-curving side rails, like a cupid’s bow. On chairs with arms, the supports were higher and the arms ran almost parallel with the seat, fixed to the sides of the seat frames almost half way back, to allow for fashionable full skirts.
Detail
Although the central splats, crest rail and legs were profusely decorated, the stiles were seldom carved, but left plain or fluted. Seats of chairs were sometimes overstuffed or had deep decorative aprons, often serpentine in shape.
It is surprising to learn that the technique of lamination was first used for the fretted backs and ornament of the Chippendale period. Layers of veneer of alternating grain were glued together and then cut with a fret saw into intricate shapes.
Variations
Simplified variations of Chippendale’s designs were made by most country furniture-makers, usually in oak, but also in elm, beech, ash and fruitwoods. They had plain wooden seats made of planking nailed to the underframe, usually in more than one piece, with the grain going from side to side. Occasionally they are to be found with rush seats.
The designs of the back include the crudest cut-out work – most commonly a curving variation of four or five straight splats, either in a wheatsheaf shape or an open vase or violin shape. Most widespread and enduring are those made in a
simplified ladderback design. Legs are square, sometimes slightly chamfered on the inner sides. The back stretcher is still set higher than the front, and the two side stretchers are parallel. The tops of the front legs form the sides of the seat frame, and there is usually a fairly deep apron.
Below left: classic example of later Chippendale, c.1700, ladder-back.
Centre: a provincial vase splat. Right: classic North country ladder-back.
Far right: nineteenth-century ‘ribband-back’.
Reproductions
Nineteenth century
Provincial furniture-makers were often as much as 50 years behind the most recent fashions, and ‘Chippendale’ chairs were still being made at the beginning of the nineteenth century. By the mid-nineteenth century they were being made by many furniture manufacturers, slightly modified, with rather meagre cabriole legs, or with the slimmer, scrolled leg and foot typical of the later period of Chippendale design. Often designs such as the ribband back and its variations had square legs and stretchers instead of cabriole legs.
Many Chippendale-style chairs were mass-produced for public rooms, assembly halls, hotels and board rooms, with machine-cut central splats, square, leather-covered seats, often dished, and with the shoe-piece made as an integral part of the back seat rail. Quality of materials and craftsmanship divide the mass-produced from good Victorian copies, which today are fetching extremely good prices.
Price bands
Late eighteenth-century mahogany, £400-550 each. Set of six, £5,000-7,000.
Country versions, £120-190. Set of six, £2,160-3,420.
Nineteenth-century walnut, £350-400 each.
Nineteenth-century mahogany – set of six, £3,000-4,000.